Powder Coating Equipment, Powder Coating Spray Booths, Powder Coating Spray Tunnels, Cyclone Recovery Systems, Powder Coating Spray Booth Equipment, Reciprocators, Sieve Unit, Pre Treatment Systems, Camel Back Ovens, Batch Ovens, Powder Coating Equipment Spare Parts & Service
 
Powder Coating Equipment
Cyclone Recovery Systems
Reverse Pulse AFter Filters
Powder Coating Spray Booths
Spray Tunnels
Infra Red Ovens
Camel Back Ovens
Batch Ovens
Conveyors
Pre-treatment Systems
Reciprocators and Sieves
Spare Parts
Gravity Chain
Paint Spraybooths and Dry Filters

Contact Us

Tel: +27 11 6090783
Fax: +27 11 4529596

Postal address:
P.O.Box 4100
Edenvale
1610
South Africa

E-mail: nkrauss@powder-rite.com


Service and Parts

Powder-Star Facia and Pistol

  1. On / off switch luminous
  2. HV Meter two digit display
  3. Pressure gauge 0 – 250 Kpa
  4. Pressure gauge 0 – 600 Kpa
  1. 5 Amp fuse / Fuse holder
  2. High Voltage knob
  3. Regulator diffuser
  4. Regulator powder

  1. Complete nozzle deflector
  2. Nozzle nut
  3. Trigger / Micro switch
  4. Compression gland 9 / 6 mm
  5. Powder hose 12 / 10 mm
  1. Deflector 16 / 18 / 24 mm
  2. Electrode Holder deflector
  3. Nozzle deflector / Fan spray
  4. Aluminium Tape

 

  1. M10 Plastic bolt
  2. Hose Pistol
  3. 7 Pin plug
  4. Obsolete
  5. Obsolete
  6. Electrode holder fan spray
  1. Fan spray nozzle
  2. Contact ring PVC / Alumin.
  3. Electrode holder deflector
  4. Deflector nozzle
  5. Nozzle nut
  6. Deflectors 16 / 18/ 24 mm

  1. Quick release fitting 6 mm
  2. Quick release fitting 6 / 8 mm
  3. Injector block
  4. Injector
  5. O Ring
  1. Hose connector
    1. Plastic
    2. Plastic / Teflon
    3. Teflon
  2. Nut
  3. Suction pipe
   

Copyright © 2009 Powder-rite
Powder Coating Equipment Spare Parts & Service